TRUCKER HDK – Plug for hollow material Ø 8 mm

USE: Light fixings to concrete, brick, hollow brick, lime sandstone, porous concrete, aereted concrete, full pumice, etc.

This KTS plug for hollow material Ø 8 mm is a true allrounder. The extra long expanding section guarantees maximum load-bearing strength. With its long shaft this plug is able to bridge all sorts of attachments and non load-bearing layers. Using a screw with a special thread the plug secures in a knot inside building material cavity.

This information should be regarded as general recommendations. More specifically, please note that these plugs and anchors may not be used for work subject to building inspections (e.g. for securing façade substructures, roofs etc.).

* Safety factor 3

Technical data HDK – Plug for hollow material Ø 8 mm
Small packing 8 x 80 mm 8 x 100 mm 8 x 120 mm 8 x 140 mm
Article-No. 1250808044 1250810044 1250812044 1250814044
Packing unit Pieces 100/ 1.000 100 / 1.000 100 / 500 100 / 500
Weight per packing unit 13,3 kg. 17,0 kg. 9,4 kg. 10,75 kg.
Screws TORX Ø 4,7 x 85 4,7 x 105 4,7 x 125 4,7 x 145

 

Testing HDK – Plug for hollow material Ø 8 mm
Material: NYLON (Polyamide 6)
Diameter mm 8 8 8 8
Length mm 80 100 120 140
Drilling diameter mm 8 8 8 8
Min. drilling depth mm 90 110 130 150
Min. installation depth mm 80 100 120 140
Clamping area mm 35 55 75 100
Pull out tension value plasterboard (kN)* 2,43 2,59
Pull out tension value hollow wall brick (kN)* 2,809 2,765